SCENE CONTROLLER

Zooz 700 Series Z-Wave Plus Scene Controller ZEN32
Scene control
Activate up to 35 scenes, control up to 35 devices.
Smart Bulb Mode
Disable the relay and control your smart bulbs with a click.
Programmable LED's
Change the brightness and color of the LED indicators on demand.
Previous
Next

5 Year Warranty

This device is covered under warranty for 5 years. We'll service and replace it if anything happens. As always, lifetime tech support is included!

700 Series Chip

You get a stronger Z-Wave repeater with this Scene Controller. Better range means a more reliable network.

ETL Certified

This product complies with the North American safety standards. ETL, just like UL, is a Nationally Recognized Testing Laboratory.

S2 Security

With SmartStart authentication, the scene controller supports the highest level of Z-Wave security.

Smart Switch

The Scene Controller is one of our most versatile devices. It can be used as a switch and as a wall remote, or both!

The main button on top of the switch can control a resistive load up to 15A, a small fan under 3A, or up to 150 W of LED lights. The device will show as an on/off switch in your hub and you’ll be able to automate it just like any of our light switches, including the multi-tap scene control triggers.

Wire it as a single pole or a 3-way switch with an existing mechanical switch or a momentary switch. Create a virtual 3-way if you’d like to have 2 smart switches in both locations. Our wiring experts are here to help you get the best solution for your installation.

If you don’t want to use the main button as a switch, that’s OK too. Simply leave the Load terminal empty and use it for remote control only.

Scene Controller

Use any of the buttons to trigger your favorite scene, smart bulb presets, or control other devices with a click.

Each of the 4 small buttons can be programmed to trigger 7 different actions. They have remote control functionality only and don’t connect to a load directly. Depending on your Z-Wave hub, the buttons may not show up as separate child devices either but only be available as triggers in automation rules and association groups.

Get detailed programming instructions for your system in our knowledge base or contact support for help. Remember to check if your hub recognizes Z-Wave scene controllers before purchasing this product.

Bonus Features

And that’s not all. This device offers more advanced functionality for a truly customized smart home experience.

Each button comes with a programmable LED indicator. Set up an automation for all of them to turn on red if your garage door is open after 10 PM.

Having connectivity issues? Enable the range test straight from the switch to diagnose your network instantly. The LED indicators will display a different color depending on signal strength to help you troubleshoot any issues.

Keep your Scene Controller up to date with over-the-air (OTA) firmware updates. We keep adding more functionality and implementing your requests so get in touch if you know how we can make the device better!

Real Reviews

You said it